Cat flaps allow your pet to leave and come back whenever they want without having to let them in or out. They can also help prevent your cat from urinating in the home.

Installing a cat flap into the door panel made of upvc is a lot easier than glass doors, however it does require some skills and the proper tools.

Measure the Door

The installation of a cat flap inside the door can be a challenge however, as long as you select the right kind of cat flap, take your time and follow the instructions provided it shouldn't be too much trouble. We will show you how to draw the shape, then use a jigsaw to cut out the area in the door and then finish off the job by fixing the flap to the door. This will ensure that the flap stays in position and also protects the doors from the damage caused by wind and rain.

To determine the size of the cat flap double glazing flap that you need, measure your pet's width. This will allow you to select a cat flap that is large enough for your pet to enter the house and leave without having to open the door every time.

Once you have the measurements you can mark out the location on the door where the template should be positioned, usually this is done with an X, but some kits come with drawings that show the location to drill, if yours does then stick it to the door and use a pencil to draw around it. If your door has a sill or moulding along the bottom edge ensure you have clearance from these because this will keep your cat safe and prevent them gaining access to your home.

Use a set square to check that you are cutting correctly and to ensure the hole is a perfect rectangle shape. Once you are satisfied with this, you can begin removing the rest of the door material. If you own an already-cut square, use it to ensure that you are cutting correctly and to ensure that the hole is a good rectangle. Once you are satisfied with this you can begin to remove the remaining door material.

Draw a Line

The cat flap allows you to let your pet in and out without having to worry about unwanted visitors or unwanted gifts. It also prevents draughts, and helps to keep your home's temperature in check. Installing a cat flap in upvc door panel flap on your door may seem daunting to those who haven't done it before. Many people will call an expert joiner or carpenter to do the work. It is an option, but you can do it yourself, provided the tools are in order and the directions are adhered to.

Although this is much simpler to accomplish with a timber door, it is still possible in uPVC doors, but you need to be very careful to avoid damaging the doors as this will cause damage to your warranty. First, you must examine the door's measurements to ensure that it can accommodate the new cat-flap. This isn't too difficult for the standard uPVC door, but you may need to take more care if you have a composite or other type of door as these can be more difficult to cut than solid uPVC panels.

The next step is to determine the height of your cat's stomach. This is the distance from the floor to the bottom of the cat's stomach, and you'll need find a spot on the door where this measurement is within the range your pet can comfortably go through. Once you have the information you'll need to mark the area using a spirit level and a pencil so that you are sure that the hole will fit your cat.

After you've marked the area, you're now ready to cut the hole. It is crucial to take your time and use a jigsaw ensure the cuts are clean and smooth not rough and uneven. This could damage your door. Be sure to wear safety glasses and a dust protection mask whenever using the jigsaw, since inhaling the sawdust can be dangerous to your health. Once you have completed the cutting, you will need to smooth out the edges of the hole with sandpaper, so that your cat flap can be fitted easily into place.

Make a hole

It can be difficult to put the cat flap onto the door panel or double glazing unit. You may be tempted to do it yourself, but unless have plenty of experience in DIY it is likely to be best to have a professional to do the job for you. A shoddy job might not only be unsightly but it could also be a security risk and also allow cold air to enter when the Fitting cat Flap In upvc door panel is outside, and hot air to escape when inside.

The first thing you need to do is mark out the position of the hole in the door with an eraser and a spirit level. This will ensure that it is located and is parallel to the other parts of the door. Make sure you have sandpaper in your possession to smooth out any rough edges.

After the line is drawn, you can cut the hole using the jigsaw. Remember to wear any safety gear for working with the power tool. If you are worried about the sound of the jigsaw, consider buying an electric version that is quieter and simpler to use.

You should only remove the material needed to create the flap. It is necessary to leave some extra material to make the wall thickness of the cat flap. However, removing too much can cause issues or even damage the door frame.

If the door is made of upvc and features a metal panel or frame, it may interfere with the microchip flap. In this scenario you'll need create an over-sized hole to ensure that the metal does not touch the walls of the flap.

If you're looking to install a cat flap in windows made of double-glazed or upvc with metal frames it is necessary to speak with a specialist. They will provide you with a brand new piece of glass that has the hole already pre-made for the cat flap. This will be cheaper than trying to fit a cat flap inside an existing pane that wasn't designed specifically for fitting Cat flap in Upvc door panel this purpose.

Place the Flap

Cat flaps let your pet move around at their own pace, giving them the freedom to relax in the home whenever they feel like it. If you have a uPVC front door, it can be difficult to put in a cat flap. This is especially true if you do not own a glass panel which can be cut. If you are willing to install a half-glazed uPVC replacement upvc door panel with cat flap panel, it's possible to install a cat flap. It's not as easy as simply making a hole in the door however, and there are some things you'll need to do first to ensure it's secure.

A composite, uPVC or GRP door panel is typically comprised of a thin plastic skin that is bonded to an insulating polystyrene core. It is important to be careful when cutting the material. This type of door has a template you can use to cut the hole.

Once you have marked the location of the hole in your door, now it's time to fit the cat flap. You can purchase and install various models that range from simple push-button operated models to microchip activated units that allow access only to your pet. No matter which type of cat flap double glazing flaps you choose it's essential that your cat can use the flap without getting caught in bad weather.

It's a good idea to opt for circular fittings instead of one that is square, because circles can be more securely cut into the door glass. It's because square holes are more likely to crack the glass when they're drilled. It's also a much safer option to use as you're not putting yourself at risk by drilling into toughened glass that could shatter and cause injury to your pet or your family. This is particularly crucial if you have elderly or children in your home who might be injured by glass fragments.